Tooth plate catalogue
Overview of punched closure and sealing profiles (tooth plates) for CB PROFIL trapezoidal sheets. Click “drawing” to open the drawing.
Types by position
- F1 eaves: installed on the underside of the trapezoidal sheet, closing the eaves edge.
- F2 ridge: installed on the top side of the trapezoidal sheet in the ridge area.
| Designation | For sheet | Position | Length [mm] | Bend | Drawing |
|---|---|---|---|---|---|
| CB ZP 35-207 F1 | CB 35-207 | F1 – bottom rib | 1,035 | 40 × 33 mm, 90° | drawing |
| CB ZP 35-207 F2 | CB 35-207 | F2 – top rib | 1,035 | 40 × 35 mm, 120° | drawing |
| CB ZP 40-160 F1 | CB 40-160 | F1 – bottom rib | 960 | 40 × 38 mm, 90° | drawing |
| CB ZP 40-160 F2 | CB 40-160 | F2 – top rib | 960 | 40 × 43 mm, 120° | drawing |
| CB ZP 45-333 F1 | CB 45-333 | F1 – bottom rib | 1,000 | 40 × 43 mm, 90° | drawing |
| CB ZP 45-333 F2 | CB 45-333 | F2 – top rib | 1,000 | 40 × 46 mm, 120° | drawing |
| CB ZP 50-260 F1 | CB 50-260 | F1 – bottom rib | 1,040 | 50 × 48 mm, 90° | drawing |
| CB ZP 50-260 F2 | CB 50-260 | F2 – top rib | 1,040 | 50 × 54 mm, 120° | drawing |
| CB ZP 55-250 F1 | CB 55-250 | F1 – bottom rib | 1,000 | 50 × 53 mm, 90° | drawing |
| CB ZP 55-250 F2 | CB 55-250 | F2 – top rib | 1,000 | 50 × 60 mm, 120° | drawing |
| CB ZP 60-235 F1 | CB 60-235 | F1 – bottom rib | 940 | 50 × 58 mm, 90° | drawing |
| CB ZP 60-235 F2 | CB 60-235 | F2 – top rib | 940 | 50 × 67 mm, 120° | drawing |
| CB ZP 135-310 F1 | CB 135-310 | F1 – top rib | 930 | 50 × 134 mm, 90° | drawing |
| CB ZP 135-310 F2 | CB 135-310 | F2 – bottom rib | 930 | 50 × 133 mm, 90° | drawing |
| CB ZP 150-280 F1 | CB 150-280 | F1 – top rib | 840 | 50 × 152 mm, 90° | drawing |
| CB ZP 150-290 F1 | CB 150-290 | F1 – top rib | 880 | 50 × 149 mm, 90° | drawing |
| CB ZP 150-280 F2 | CB 150-280 | F2 – bottom rib | 840 | 50 × 152 mm, 90° | drawing |
| CB ZP 150-290 F2 | CB 150-290 | F2 – bottom rib | 880 | 50 × 148 mm, 90° | drawing |
| CB ZP 160-250 F1 | CB 160-250 | F1 – top rib | 750 | 50 × 159 mm, 90° | drawing |
| CB ZP 160-250 F2 | CB 160-250 | F2 – bottom rib | 750 | 50 × 157 mm, 90° | drawing |
All dimensions in mm. Angle α is the internal angle between the legs of the element.
Examples of tooth plate details
Other dimensions, leg lengths, bending angles and perforated versions on request. Material 0.75 mm, galvanised or pre-painted in RAL colours.
Inquiry
Do you have a technical drawing, a simple sketch or just an idea of the required design?
Send us your documents by e-mail or WhatsApp, or give us a call.